Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram

0
Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram

Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram


Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram


Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram


Check/Read Info

كود:
Set mode to : SP [SC983x] eMMC [Generic Android 7.x] Operation : Check/Read Info [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key 3. Insert cable ==== Wait for phone… Phone found! [ 6 ] Port Opened Sync… InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync… Sending FDL [Info] : If SW freeze here more, than 15 seconds – remove cable FDL Ready! Boot Ver : SC983x eMMC Loader v5.0 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FLASH : eMMC Flash , Structure : Ok! Reading extended info … Model Name : Griffe_T1 Model Brand : Condor Model Device: Griffe_T1 AndrVersion : 7.0 BaseBand CPU: SP9832A_2H11_VOLTE CompileDate : 01-08-2017 8:26:17 Project Ver : SP413_V12_20170801 Model Ext : SP413 ExtraInfo : HWInfo not exists, normal phone Elapsed: 00:00:28 Reconnect Power/Cable!


Read FullFlash

كود:
Set mode to : SP [SC983x] eMMC [Generic Android 7.x] Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key 3. Insert cable ==== Wait for phone… Phone found! [ 6 ] Port Opened Sync… InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync… Sending FDL [Info] : If SW freeze here more, than 15 seconds – remove cable FDL Ready! Boot Ver : SC983x eMMC Loader v5.0 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! – > Wait phone connected … Phone found! [ 6 ] Port Opened Sync… InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync… Sending FDL [Info] : If SW freeze here more, than 15 seconds – remove cable FDL Ready! Boot Ver : SC983x eMMC Loader v5.0 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! – > Wait phone connected … Phone found! [ 6 ] Port Opened Sync… InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync… Sending FDL [Info] : If SW freeze here more, than 15 seconds – remove cable FDL Ready! Boot Ver : SC983x eMMC Loader v5.0 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : Griffe_T1 Model Brand : Condor Model Device: Griffe_T1 AndrVersion : 7.0 BaseBand CPU: SP9832A_2H11_VOLTE Project Ver : SP413_V12_20170801 Model Ext : SP413 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now … [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : nvitem_l.bin [Read Ok] : sc983x_cp1.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : l__WPH_arm7.bin [Read Ok] : PM_arm7_sys.bin [Read Ok] : logo_480x854.bin [Read Ok] : fblogo_480x854.bin [Read Ok] : wcn_fdl.bin [Read Ok] : AA_MARLIN.bin [Read Ok] : boot.img [Read Ok] : trustos.bin [Read Ok] : vmm.bin [Read Ok] : system.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2506 MiB Saved to : C:\Users\INFO.GSM\Desktop\SP9832A_2H11_VOLTE_Griffe_T1_7.0_SP413_V12_20170801_SP413\ Done! Elapsed: 00:10:56 Reconnect Power/Cable!


Read NV

كود:
Set mode to : SP [SC983x] eMMC [Generic Android 7.x] Operation : Read NV [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key 3. Insert cable ==== Wait for phone… Phone found! [ 6 ] Port Opened Sync… InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync… Sending FDL [Info] : If SW freeze here more, than 15 seconds – remove cable FDL Ready! Boot Ver : SC983x eMMC Loader v5.0 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Detected eMMC Flash , Structure detect Ok! Read LTEx NV #1 Read Ok , 0x1AF8A Saved to : C:\Users\INFO.GSM\Desktop\CX77xx_SPDNV.spdnv Elapsed: 00:00:42 Reconnect Power/Cable!



Convert InfinitySC to SPRD PAC

كود:
Operation : Convert InfinitySC to SPRD PAC [ v1.27 ] Target : SP9832A_2H11_VOLTE_Griffe_T1_7.0_SP413_V12_20170801_SP413 Step #1 : Identify MEMORY : eMMC LAYOUT : eMMC NORMAL Step #2 : Select logic Select Logic : SC9832 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_l.bin [ADD FILE] : prodnv.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc983x_cp1.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : l__WPH_arm7.bin [ADD FILE] : PM_arm7_sys.bin [ADD FILE] : logo_480x854.bin [ADD FILE] : fblogo_480x854.bin [ADD FILE] : wcn_fdl.bin [ADD FILE] : AA_MARLIN.bin [ADD FILE] : boot.img [ADD FILE] : system.img [ADD FILE] : sysinfo.img [ADD FILE] : cache.img [ADD FILE] : recovery.img [ADD FILE] : userdata.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x001A Sign PAC … Sign Ok! FW compiled! Elapsed: 00:02:10 Saved to : SP9832A_2H11_VOLTE_Griffe_T1_7.0_SP413_V12_20170801_SP413.pac Done!

Fw Infinity PAC.SC

https://mega.nz/#!tpc1nTiR!uABdq_vd7…R_oZhIHj1f32ck

SPRD PAC

https://mega.nz/#!8xNhyDBK!uHuxXji3D…AXcRwlvqMCEFDs

Nvram

https://mega.nz/#!ExlF1IQD!veKB9_-CL…XEhnzko3AQfob8

Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram

كود فك الضغط
www.dzgsm.com

Condor Griffe T1 (SP413) Firmware Infinity PAC.SC + SPRD PAC + Nvram

Condor Griffe T2 (SP530) Firmware Infinity PAC.SC + SPRD PAC + Nvram

تم حذف الروابط من طرف موقع mega
سيتم تجديد الروابط في أقرب فرصة ممكنة بإذن الله
لمن يبحث عن فلاشة الهاتف
هي متوفرة حاليا بالسبيور الرسمي لأجهزة كوندور

 

Votre avis

Laisser un commentaire